The closest option we have is the MORryde RV Cargo Slide part # MR84FR which is 90 by 20 inch and has a 2 way slide like it sounds like you are asking for. view full answer...
The cargo tray that you will want for your 33" x 90" cargo compartment is the MORryde RV Cargo Sliding Tray # MR46FR.
The width of the MORryde RV Cargo Sliding Tray - 90" x 33" # MR46FR is 32.74". They list it as 33" but also state that actual measurements are 1/4" smaller in order to fit in the width opening it's listed under. The width is including the sliding brackets and the handle so your 33" opening will work with the # MR46FR tray. view full answer...
The MORryde RV Cargo Sliding Tray # MR69FR that you referenced comes with everything needed to install. The rail assembly that it slides on is included. view full answer...
Yes, we have the MORryde RV Cargo Sliding Tray, # MR68FR. This has a measurement inside the tray of 35.85" width by 34.21" of depth. The overall dimensions: 36" long x 39" wide x 6-5/8" tall. This has a 60 percent tray extension. Please note the attached image showing measurements.
If needed, there is the Height Adjustment Kit for MORryde RV Cargo Sliding Trays, # MR34VR. These adjustable brackets raise your MORryde sliding tray up to 3-1/8" higher so it can slide all the way out... view full answer...
Yes. In order to raise the RV Cargo Sliding Tray # MR55FR, you need the Height Adjustment Kit for MORryde RV Cargo Sliding Trays # MR34VR. This kit allows you to raise the tray by 2-1/2", 2-3/4", or 3-1/8" in height. view full answer...
To pick out the correct MORryde RV Cargo Sliding Tray I would need to know the width and depth of your compartment to see what would be the correct size. We don't have a way to determine what you'd need with just the RV name and model info.
If your compartment lip is taller than 1-5/8 inches you'd need the lift kit part # MR34VR. view full answer...
The MORryde RV Cargo Sliding Tray, # MR77FR that is 72" x 26" with an 80 Percent Extension can be bolted to the bed of your truck using the included hardware or even rivets. There really is not a wrong way to install as long whatever fasteners that are used hold the tray securely and safely in place. view full answer...
It will be a very close fit but the MORryde RV Cargo Sliding Tray part # MR67FR would work in a cargo doorway that is 25-3/4 inches wide. The overall unit is 26 inches wide but the portion that would slide through the opening is narrower than that. So basically you'd have to angle the assembly when putting it through the opening to install it but then it would slide in and out without any issues. view full answer...
I had our warehouse measure the MORryde Sliding Tray for RV Cargo Compartment # MR34FR you were looking at and the inside dimensions are 34-1/8" long x 16-3/4" wide so your 19" wide generator will not fit.
You will need to step up to a larger tray such as the MORryde Sliding Tray for RV Cargo Compartment - 36" x 26" # MR37FR which will be plenty wide for your generator, and the 800lb capacity will be more than enough for your generator.
This slide opens with the narrower 26" wide side... view full answer...
We have the MORryde RV Cargo Sliding Tray - 90" x 33" - 2 Way Slide - 60 Percent Extension - 800 lbs # MR46FR. This will replace your old system no problem.
If you have a damaged unit you can contact our customer service department and speak with them to get the issue resolved.
You can find there number at the top of our website. view full answer...
Yes the MORryde Sliding Tray for RV Cargo Compartment - 72" x 48" - 500 lbs - 2 Way # MR52FR that you referenced does slide both directions like you are wanting. view full answer...
The actual tray dimensions of the MORryde RV Cargo Sliding Tray # MR44FR that you referenced are 58-1/4" long x 16-7/8" wide whereas the overall dimensions 60" long x 20" wide. The hardware used with this will be at your discretion although it is advised to use as much of it as you can but obviously you'd have to work around the water tank you mentioned. view full answer...
All of our generator slide out trays require removing the generator before using it. The reason that you cannot use the generator while it is in the MORryde RV Generator Slide Out Tray # MR69RR is because the tray only locks in the stored position. If you use the generator in the tray, it could potentially slide back into the storage compartment and cause CO2 to get into your RV. The purpose behind the MORryde RV Generator Slide Out Tray # MR69RR is to make getting your generator in and... view full answer...
I have another option that may work for you, but the the MORryde Sliding Tray for RV Cargo Compartment - 90" x 26" - 800 lbs - 2 Way # MR87FR you were looking at is the not available in a 20-22" width to fit the access door in your 2021 Outdoors RV Timber Ridge 22 FQ.
The closest option is the MORryde Generator Tray - 15-3/4" x 16-1/4" # MR99RR which measures 15- 3/4" long x 16-1/4" wide x 5" tall and has a weight capacity of 250lbs. view full answer...
The cargo carrier that would fit the dimensions you need the best and can fold up when not in use is the etrailer carrier part # e98874 which measures 24 inches by 62 inches. This is also easily removable too when not in use. I attached a review video for this carrier for more info for you to check out as well.
Also your back up camera is located at the top of your rear slide out right underneath the awning. view full answer...
From the attached images you provided, I see no reason that the MORryde Sliding Tray for RV Cargo Compartment, # MR74FR would not mount well. Yes there will be a slight overhang but that is fine, for fitment the inside measurement between the doors is primary concern. Followed by location of mounting hardware. The tray will fit and if want install offset then account for that with mounting hardware. view full answer...
The correct cargo compartment slide for you would be kit # LC370762. This is the biggest one available which would work best for you. This system can be used on virtually any size plywood board as long as it is the correct depth. You would want to pick the board size that would work best for your setup and then install the # LC370762 onto it and it would be good to go. view full answer...
The closest I was able to get to your 23-1/2" x 23-1/2" measurements while still giving you the most amount of tray length is the MORryde RV Generator Slide Out Tray - 19-1/4" x 23 # MR89RR.
This cargo tray measures 19-1/4" wide and is 23" long and has a maximum weight capacity of 250-lbs.
If you preferred something to fill the space more but lose tray length, the MORryde RV Generator Slide Out Tray # MR69RR would be the better option as this tray measures 23-1/8" wide and is 15-3/4" long. view full answer...
In order to secure a cargo carrier between your RV and towed vehicle, you will just need to start with the Roadmaster Dual Hitch Receiver Adapter # RM-077-4. This will slide right into the 2 inch hitch on your RV and provides two, 2 inch receivers on the other end. The bottom receiver will be used for your tow bar, while the top receiver can be used for a hitch-mounted accessory like a cargo carrier.
Once this is in place, it is just a matter of choosing a cargo carrier that works well... view full answer...
I do have an option for you but I can't recommend modifying the MORryde RV Cargo Sliding Trays like part # MR47FR. I'm sure you could make them work for you but I can't really offer any assistance with this. That said, we have a much better option for you in the BedSlide Sliding Truck Bed Tray part # BE26WR which is a custom systems designed specifically for your truck so there's no modifying. You can also add all sorts of accessories like the Complete BedBin Kit for BedSlide Truck Bed... view full answer...
Go To Results